Installing your

Wall&Water will give you

instant satisfaction.

How to install your

Kitchen Wall?

Just follow the steps.

1. Remove the plastic foil on the backside of

the panel and rub the backside slightly with

a 60-80 grit sandpaper.

2. Apply BerryAlloc Adhesive on the

existing wall. Remove the protecting foil

on the front side of the panel before you

continue with the next panel. That way

you’ll exclude any visual defects.

3. Remember to leave a distance of

2-3 mm between the panel and the kitchen

countertop for sealant.

4. To make sure that the panel is not

sliding, use something to keep the panel

up. This can be:

Two spikes (levelled)

Two coins (levelled)

More detailed installation instructions

can be found on our website or YouTube

channel: berryalloc.com &

youtube.com/berryalloc.

Glued or interlocking, our wall panels

combine ease of installation with ease

of maintenance. Wall&Water is the only

system in the world offering you the

look of a tiled wall this quickly and easily

- all without the need for grouting.

1. Wall&Water panels are best mounted

on a wooden frame. The panels interlock

thanks to the unique ‘lock’ system

developed at our engineering department

in Norway. The result: a smooth wall with

no visible joints. Your bathroom will be

ready in a splash!

2. The panels can also be glued directly

onto a solid wall. In this case, the walls

must be absolutely straight and smooth.

3. For walls with existing coverings of

varying thickness (such as tiles halfway up),

you can fix wooden boards of the same

thickness and use BerryAlloc glue.

More detailed installation instructions

can be found on our website or YouTube

channel: berryalloc.com &

youtube.com/berryalloc.

wall&water / installation

kitchen wall / installation

5 cm