LAY-FLAT FIRE HOSES

LAY FLAT FIRE HOSES

Lay flat fire hoses, for fixed systems inside buildings, industrial hose

systems, fire brigades, marine equipment.

Fire Hose Type 1

- Yarn: polyester high tenacity circular loom woven

- Inner lining: thermoplastic black elastomer

- Further advantages: maintenance free, mildew proof

- Employ: Water network in civil buildings

- Available diameters: DN 25, DN 38, DN 45, DN 52, DN 63, DN 70, DN 75, DN 100,

DN 125, DN 150

- Compliant to: EN 14540 until DN 52.

Fire Hose Type 1/MED

- Yarn: polyester high tenacity circular loom woven

- Inner lining: EDPM rubber or thermoplastic elastomer

- Further advantages: maintenance free, mildew proof

- Employ: marine equipment

- Certification: Marine Equipment Directive 2014/90/EU (MED)

Fire Hose Type 2

- Yarn: polyester high tenacity circular loom woven

- Inner lining: EDPM rubber

- Outside coating: red resin

- Further advantages: resistent to aggressive enironment, oil, chemical agents,

hydrocarbons, mildew proof

- Employ: marine equipment and water network in industry with high fire risk and

aggressive environment, heavy duty, refinery and petrol-chemical plants.

- Compliant to: ENI 0198.00 type B table.

- Certification: Marine Equipment Directive (MED) DN 45 only upon request

- Available diameters: DN 25, DN 45, DN 70

Fire Hose Type 3

- Yarn: polyester high tenacity and polyamide circular loom woven

- Extruded hose: polyester yarn embedded in extrusion of NVC compound. Ribs

on the external surface to increase abrasion resistance.

- Further advantages: high abrasion resistance, resistant to oil and chemicals, very

good ageing and UV resistance.

- Employ: municipal and industrial fire brigades, ships, refineries, industrial and

military use.

- Compliant to: ENI 0198.00 type C table.

8 Bocciolone Antincendio · Fire Fighting Equipment